Pololu Simple Manuel d'utilisateur télécharger pdf (Page 32)

Status tab in the Pololu Simple Motor Control Center.

Before you can move the motor, you will probably need to click the green Resume button in the lower left corner to

clear the safe-start violation. If the Resume button is grayed out, there are errors that are preventing the motor from

moving. See Section 3.4 for information on how to identify and fix errors.

Safe Start is an optional feature, enabled by default, that makes it less likely that the motor will start

moving unexpectedly.

4.2. Connecting a Serial Device

The serial pins make it possible to connect the Simple Motor Controller to a microcontroller (e.g. an Orangutan

Robot Controller [http://www.pololu.com/category/8/robot-controllers], Arduino [http://www.pololu.com/product/2191], or Basic

Stamp [http://www.pololu.com/product/1600]) or other logic-level serial device, allowing for the creation of autonomous,

self-contained systems. The following section explains the serial pins in detail (see Section 6 for information on using

the serial interface).

4. Connecting Your Motor Controller Page 32 of 101

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 100 101

Pas de commentaire

Pololu Simple Manuel d'utilisateur Page 32