Pololu USB AVR Manuel d'utilisateur télécharger pdf (Page 37)

avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.05s

avrdude: verifying ...

avrdude: 224 bytes of flash verified

avrdude: safemode: Fuses OK

avrdude done. Thank you.

rm BlinkLED.o BlinkLED.obj

This output indicates the AVR was successfully programmed. The LED connected to PD1 of your AVR should now

be flashing! Note that if you are trying this on a 3pi robot and you have not yet soldered in the optional through-

hole LEDs, the flashing LED will be on the bottom of the robot. If there was a problem, please see Troubleshooting

(Section 8) for help identifying and fixing it.

4. Getting Started in Linux Page 37 of 54

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

Pas de commentaire

Pololu USB AVR Manuel d'utilisateur Page 37